Humidity Control Solved Floor Wetting & Weaving Issues in Towel Production


About IKEUCHI ORGANIC

IKEUCHI ORGANIC is a renowned “Imabari Towel” manufacturer based in Imabari City, Ehime Prefecture, on the island of Shikoku, Japan. They power their factory and directly managed stores entirely by wind energy, pursuing the philosophy of “maximum safety and minimum environmental impact.” The towels they produce have gained global attention under the name “towels woven by the wind.”
(Imabari Towels are high-quality towels that have made Imabari one of Japan’s largest towel production areas, boasting over 120 years of history.)


“Good looms alone don’t make good towels.
Without proper temperature and humidity control,

you just can’t make good towels.”

Wet Floors and Static Electricity Issues

In the past, we were using humidifiers from another company, but they were quite old. The mist was pretty coarse, and it often turned into droplets that ended up wetting the floor. With so many looms lined up in the factory, having a wet floor was a real safety concern — people could slip and bump into a machine.

At the same time, the humidity in the factory wasn’t anywhere near the 60–70% RH we need for weaving towels. When the humidity drops, static electricity builds up and lint starts to form more easily. Fluff sticks to the yarn and eventually turns into these little lumps we call “futsuke”.
When futsuke appears, we have to stop the loom and take it out. But when you reach your hands between the looms to remove it, the yarn tends to loosen, and sometimes it even snaps — so it caused a lot of trouble and production stops.

We really wanted to solve the problems caused by wet floors and low humidity and improve our production efficiency. While we were looking for a better solution, our company president was introduced to IKEUCHI through a trading company, and that’s how we learned about the AirAKI Dry Fog humidification system.
The fog is extremely fine — about 10 microns or less on average — so it doesn’t drip or wet the floor. Because the fine droplets mix into the air so easily, they raise the humidity directly. It was exactly what we were looking for, so we decided to go ahead and install it right away.

Benefits Achieved

Since we installed AirAKI, we’ve seen far less static electricity, and we hardly ever get futsuke anymore. That means the looms don’t have to stop as often. We keep hygrometers in the factory and manage humidity while checking them, because the ideal humidity is different for each type of towel.

CONTACT US

For product inquiries or to request brochures, please click here.